RED RTV Gasket Maker Neutral Type
RED RTV Gasket Maker Neutral Type
| Item code: | GM-RD0085 |
| Volume: | 85 g |
| Packaging: | 12 pcs. |
| Category: | Body |
Description
Mode of application
Video
Red Gasket Maker - heat resistant sealant - red gasket. The material withstands maximum heating - up to +343 C, it is recommended for sealing timing covers, cylinder heads, manifolds, carburetor. The product meets the requirements of modern car manufacturers and can also be used at home
BENEFITS OF AIM-ONE RED SEALANT:
- increased heat resistance (up to +343 C);
- accelerated hardening;
- neutral (odourless);
- resistant to motor fluids, water and antifreeze;
- safe for oxygen sensors.
RTV SILICONE PRODUCTS
The red sealant is based on neutral-based RTV silicone, which does not react to aggressive substances, withstands oil, grease, coolants, and does not oxidise. Red Gasket Maker emits virtually no odour during application. Product feature of — increased heat resistance. The material is ideal for repairing and replacing most automotive gaskets (exhaust manifold, water pump, exhaust pipe, thermostat housing), as well as other equipment. Red sealant dries and hardens faster than other analogues: 7-10 minutes are enough for drying, full polymerization occurs in 15 hours. The tool comes in a convenient tube, easy to apply.
- Thoroughly clean the surface to be treated
- Pierce the seal of the tube with the upper side of the cap, put on the supplied nozzle, cut the tip of the nozzle to the desired size
- Apply sealant around the perimeter of the cleaned surface, forming a layer 2-3 mm thick
- Let it dry for 8-12 minutes
- Connect parts required for sealing
- Remove excess silicone
- Silicone will harden within an hour and will be fully stiffened within 18-24 hours