Black RTV Gasket Maker Neutral Type
Black RTV Gasket Maker Neutral Type
| Item code: | GM-BK0085 |
| Volume: | 85 g |
| Packaging: | 12 pcs. |
| Category: | Body |
Description
Mode of application
Black Gasket Maker - high quality sealant - black gasket. The product is optimally suited for forming gaskets, designed to repair or replace almost all gaskets found in a car. The material withstands temperatures in the range from -60 to +315 C, it meets the requirements of modern car manufacturers. The composition can be used for domestic and household purposes.
BENEFITS OF AIM-ONE BLACK SEALANT:
- Heat-resistant (up to + 315 C);
- Resistant to lubricants, coolants and water;
- Neutral (odourless);
- Safe for oxygen sensors;
- Universal.
EFFICIENT PRODUCT
The product is based on RTV silicone, which hardens at room temperature and turns into a rubber mass within 1 hour. Thus, the tool can replace gaskets of various sizes and shapes. When applied, the composition completely fills the irregularities, reliably sticking to the base. The applied sealant is elastic, flexible, withstands sub-zero and elevated temperatures and is not destroyed by water, oils, antifreeze and brake fluid. This Aim-One product does not oxidise and is safe for cars with oxygen sensors. The sealant comes in a convenient compact tube, is applied by simple extrusion, and practically does not emit odour when used, which is especially important for car services
- Thoroughly clean the surface to be treated
- Pierce the seal of the tube with the upper side of the cap, put on the supplied nozzle, cut the tip of the nozzle to the desired size
- Apply sealant around the perimeter of the cleaned surface, forming a layer 2-3 mm thick
- Let it dry for 8-12 minutes
- Connect parts required for sealing
- Remove excess silicone
- Silicone will harden within an hour and will be fully stiffened within 18-24 hours